Dust Collection Products - DustDroid™ Vacuums

The ideal dust collection products for extracting fine dust created by cutting, sanding or grinding concrete and masonry are the DustDroid™ series of vacuums. The DustDroid™ is available in 130 CFM, 300 CFM and 600 CFM models. These vacuums are priced considerably lower than other HEPA vacuums, and have fewer moving parts, which makes them more reliable.

DustDroid™ 130

The Dustless DustDroid™ 130 produces a flow rate of 130 CFM and features a 16-gallon canister, HEPA filter and 2 pre-filters that remove the majority of the dust, thereby extending the life of the HEPA filter. The DustDroid™ 130 is an economical dust collection product, and an economical way to achieve complete dust removal.

You can get more information on the DustDroid™ 130 vacuum here.

DustDroid™ 300

Meant for more demanding jobs, the DustDroid™ 300 runs at 300 CFM and uses a larger 20-gallon canister that is easily removed for emptying. This vacuum also features an AirBlast™ filter cleaning system that can be activated while you are working and AirBender™ technology that will allow you to go 10 times longer between filter cleanings ... another cost-efficient dust collection product from Dustless Technologies.

Find out more about the DustDroid™ 300 vacuum here.

DustDroid™ 600

The DustDroid™ 600 vacuum is the perfect tool for large jobs. It operates at 600 CFM and features a 30-gallon canister. The ultimate in dust collection products, this vacuum has 2 motors, 2 HEPA filters, 2 AirBlast™ handles and 2 gauges that tell you when each filter has to be cleaned. You can even operate at 300 CFM by running only one of the motors. The DustDroid™ has great flexibility, runs on 120 volts and can even run on 240 volts if necessary.

For more information on the DustDroid™ 600 vacuum, click here.